[PATCH] crypto: qat - Move BAR definitions to device specific module

[Tadeusz Struk]

Move PCI BARs definitions to device specific module where it belongs.

Signed-off-by: Tadeusz Struk <***@intel.com>
---
drivers/crypto/qat/qat_common/adf_accel_devices.h | 2 --
drivers/crypto/qat/qat_common/qat_hal.c | 3 ++-
.../crypto/qat/qat_dh895xcc/adf_dh895xcc_hw_data.h | 2 ++
3 files changed, 4 insertions(+), 3 deletions(-)

diff --git a/drivers/crypto/qat/qat_common/adf_accel_devices.h b/drivers/crypto/qat/qat_common/adf_accel_devices.h
index fe7b3f0..2ed4256 100644
--- a/drivers/crypto/qat/qat_common/adf_accel_devices.h
+++ b/drivers/crypto/qat/qat_common/adf_accel_devices.h
@@ -56,8 +56,6 @@
#define PCI_VENDOR_ID_INTEL 0x8086
#define ADF_DH895XCC_DEVICE_NAME "dh895xcc"
#define ADF_DH895XCC_PCI_DEVICE_ID 0x435
-#define ADF_DH895XCC_PMISC_BAR 1
-#define ADF_DH895XCC_ETR_BAR 2
#define ADF_PCI_MAX_BARS 3
#define ADF_DEVICE_NAME_LENGTH 32
#define ADF_ETR_MAX_RINGS_PER_BANK 16
diff --git a/drivers/crypto/qat/qat_common/qat_hal.c b/drivers/crypto/qat/qat_common/qat_hal.c
index 9b8a315..b818c19 100644
--- a/drivers/crypto/qat/qat_common/qat_hal.c
+++ b/drivers/crypto/qat/qat_common/qat_hal.c
@@ -679,7 +679,8 @@ int qat_hal_init(struct adf_accel_dev *accel_dev)
struct icp_qat_fw_loader_handle *handle;
struct adf_accel_pci *pci_info = &accel_dev->accel_pci_dev;
struct adf_hw_device_data *hw_data = accel_dev->hw_device;
- struct adf_bar *bar = &pci_info->pci_bars[ADF_DH895XCC_PMISC_BAR];
+ struct adf_bar *bar =
+ &pci_info->pci_bars[hw_data->get_misc_bar_id(hw_data)];

handle = kzalloc(sizeof(*handle), GFP_KERNEL);
if (!handle)
diff --git a/drivers/crypto/qat/qat_dh895xcc/adf_dh895xcc_hw_data.h b/drivers/crypto/qat/qat_dh895xcc/adf_dh895xcc_hw_data.h
index 65dd1ff..01e0be2 100644
--- a/drivers/crypto/qat/qat_dh895xcc/adf_dh895xcc_hw_data.h
+++ b/drivers/crypto/qat/qat_dh895xcc/adf_dh895xcc_hw_data.h
@@ -48,6 +48,8 @@
#define ADF_DH895x_HW_DATA_H_

/* PCIe configuration space */
+#define ADF_DH895XCC_PMISC_BAR 1
+#define ADF_DH895XCC_ETR_BAR 2
#define ADF_DH895XCC_RX_RINGS_OFFSET 8
#define ADF_DH895XCC_TX_RINGS_MASK 0xFF
#define ADF_DH895XCC_FUSECTL_OFFSET 0x40